Tire storage is needed for businesses and drivers because you always have to prepare in a garage with one to two sets of spare or seasonal tires.
Or on long trips, we also have to find a way to prepare the tires for the worst-case scenario. To make this process faster and more stable, you need to know the best way for stacking tires.
If you are unfamiliar with this concept or need help understanding it thoroughly, the knowledge in my article below will help you.
What Is Stacking Tires?
Stacking tires is a collective name for storing tires in a limited space to meet various needs.
Based on environmental factors and storage conditions, there are many tires stacking methods that have distinct advantages and disadvantages. So you need to establish the characteristics you want to make the most suitable choice.
Recommend Reading: Where Can I Get My Own Tires Installed? Detailed Explain!
Why We Need Stacking Tires?
Most stores use different arrangements to optimize space.
While individual users tend to use a static method habitually.is used stacking tires for storage, they all have the same purpose:
Unlike many other vehicle parts, the tires are large and high in weight. If you find the right arrangement and fixation, moving or removing the product will be easy.
Not to mention the safety factor. What if a tire at the top of a stack of tires suddenly dropped and hit someone? No one wants this bad luck to happen.
Because of rubber’s main structure, these products easily deform under the influence of external forces.
If you arrange the method correctly, we will no longer need to worry too much about this problem. Because the impact force will be distributed more evenly and help preserve the tire longer.
Recommend Reading: What Are Z-Rated Tires? The Answer Is Here
How many ways are there to stack tires?
Today, there are 4 most popular stacking tires: tread, horizontal, barrel stacked, and laced. Each method has characteristics worth studying and applying to the tire storage process.
All 4 arrangements have many variations, but I will focus only on the essential elements.
On the tread
True to its name, on the tread is a vertically stacked arrangement. You will need to place one tire resting on the other and keep repeating this action until you get the right height.
Most casual users will choose the tread because this way is relatively easy to manipulate or take out the sorted products. You can also quickly determine the type and condition of the tires inside. Most importantly, the cost to arrange or maintain tires in this method is the lowest.
However, on the other hand, accessing the products at the top will be easier if the tire stack is too high. At this point, we will also need ladders or support tools.
On the tread is also not suitable for storing tires in large warehouses because moving the stacks will be pretty tricky. That consumes a lot of our time and effort.
You can simply understand that horizontal is on the tread but placed horizontally instead of vertically. We will put all the tires side by side in a horizontal row with the length depending on your needs.
Regarding advantages, horizontal stacks of tires are extremely easy to manage when allowing us to check, remove or add simply. However, because it is placed horizontally, this method will take up a lot of surface area.
Barrel stacked is a standard method of tire sorting that large stores or warehouses use. This also appears in containers to increase stability and reduce space occupation.
Here, we will use stackable tire racks with a structure like a giant tray to put the tire on. An array of multiple frames in series will maximize tire load capacity in confined spaces.
In addition, the openness of these structures allows easy management, inspection, and monitoring of the tire’s condition. If there is any abnormal situation, you can make the necessary changes or corrections in time.
More specifically, the tire will be fixed on the tray so that moving will be much easier with the help of forklifts. We need to lift a whole block of tires instead of moving from product one.
The handling or unloading time is also, for this reason, significantly reduced compared to other ways of loading.
Laced is a method dedicated to storing large quantities in the same size or type.
Because you will have to put it all together like braiding a rope and just one tire with the wrong size, the link connecting an entire structure will weaken and reduce the stability of a whole rack.
The laced process will start with a tire lying flat on the ground. Next, we will insert this tire into another product with a distance of half the diameter. We continue this process until we reach the horizontal rack limit.
Because of the tight connection, this whole tire block will have high stability.
At the same time, we will save up to 30% of space when we tire the products into one block. And, of course, we can move the whole block at once instead of separating each part horizontally or on the tread.
What is the best way to stack the tires?
There is no fixed answer as to the best way to stack tires. Instead, we will have each method suitable for different cases.
Individual users or small shops can take advantage of horizontal’s versatility. Some places combine horizontally and on the tread to create large stacks and save space.
For large warehouses, laced allows for saving an area, while barrel stacked will be more suitable for long-distance tire transportation. Or we can even use tire storage racks for sale to store devices at home if we like.
How Do You Stack Truck Tires?
Stacking truck tires are no different from stacking conventional tires. However, you should still be careful when choosing a storage method for these products.
Truck tires are often quite heavy and oversized, and we will have the wrong choices to apply with this equipment.
Frequently Asked Questions
How many times can you stack on top of each other?
You can stack the tires on top of each other to save space underneath. However, there are more reasonable answers to how to stack used tires.
Used tires often do not hold air well anymore. Therefore, if stacked for a long time, it is easy to experience deformation.
How many tires can fit in a 40-foot container?
On average, a 40-foot container can load about 600 tires. With different sizes, this number will appear different. However, if you arrange it correctly, the total number of tires will always be at most 600.
Can we arrange tires with rims or not?
You can arrange rim tires, but on condition that you order these products horizontally or on the tread.
What do you need to do before storing your tires?
You will need to weather check between treads, clean each product, and remove any remaining debris or plaque in the grooves. Be sure to do all of these before you start archiving.
There are indeed many different ways for stacking tires to consider. And I hope that the knowledge I provide in the article below can help you choose the arrangement type that best suits your needs. Thereby optimizing the arrangement space and also the time for moving or dismantling.