The DiabloSport Trinity Performance Programmer is one of the most advanced diagnostic tuning devices on the market today. With over 100MB of on board memory devoted solely to recording and playing back diagnostic PID/DMR data, it allows users to record hours and hours of continuous data streams directly from the vehicle's PCM/ECM. The Trinity interprets PID and DMR data received from the OBD-II diagnostic on your vehicle and converts it into a readable format that shows up as a virtual gauge monitor. Individual user customization is one of the Trinity's most recognizable features.

One of the most intriguing features is the virtual drag tree. Using parameters such as vehicle speed, peak torque, wheel speed and others, the Trinity is able to give you an estimated quarter mile, 1/8 mile or time trial. Keep in mind that these numbers may or may not be accurate depending on variables, but they sure are fun to see. The Trinity's virtual tree allows users to choose to either monitor their reaction time or have the tree start when they press the gas from a stop. There are advantages to both. If you are using reaction time, you will gain experience for the track when launching off the line while the motion start will show you the time less human error. It's your choice as to which you prefer.

Towing: This setting is generally a gain of 25-60 hp and an average of 100 ft/lbs of torque and is for use when towing heavy loads near the applications factory towing capacity. This setting is designed to increase drivability while towing, net extra economy when cruising at highway speeds, and is helpful when driving through mountains while towing.

Economy: Adds between 35-100 hp and up to 180-200 ft/lbs of torque, economy gains average in the 2-3 mpg range. This setting is not designed for heavy towing. Limits are in the range of 6000-8000 pounds depending on your vehicle's stock towing capacity. DiabloSport highly recommends the use of an aftermarket cold air intake and exhaust with a 4 inch diameter at the down pipe.

Extreme: This setting adds anywhere from 45-185 hp and up to 220+ ft/lbs of torque and is specifically for peeling out down the strip. DiabloSport recommends only using the extreme tuning options if you have an exhaust and cold air intake due to a possible increase in EGT.

Trinity can also be used as a diagnostic code reader. Save yourself hundreds of dollars each year reading/clearing your own computer codes rather than paying a dealer to do the same. It's as easy as a few simple steps.

• Virtual gauge monitor that converts diagnostics into a readable format
• Virtual drag tree gives you an idea of how fast your vehicle is in a 1/4 mile, 1/8 mile, or time trial
• Three different settings to set your vehicle up the way you would like it
• Diagnostic code reader allows you to read or clear codes via a simple process

The DiabloSport Trinity Performance Programmer for the Ford F-Series is tediously designed by professionals to improve your Ford's horsepower and economy correctly and accurately for proven results that will keep your blood pumping and your hands glued to the wheel.