|
|
CORE Trax Bed-Mounted Management System
|
|
The finest track tie-down systems available, CORE-Trax are manufactured from aerospace alloys for ultimate strength.
- Strong
- Aerospace alloy construction
- Versatile mounting
- Black or silver finish
- Sold in sets of two
| Use kits individually or combine kits for ultimate tie-down possibilities! Combine two 3 ft tracks end to end to span 6 ft, two 4 ft tracks end to end to span 8 ft, or one of each to achieve a combined length of 7 feet. |
CORE-Trax Strength Testing Data
-
Aluminum extrusion failed at 1,520 lbs direct pull
-
Load locks assembly: Direct pull at weld, pin failed at 4,680 lbs, pull with weld area 90 degrees to load, pin failed at 4,820 lbs, welded ring failed at 5,675 lbs
-
Operating strength of unit recommended not to exceed 1/3 to 1/2 of lowest failure level (510–760 lbs per load lock)
CORE-Trax Tie-Down System Components
Track
-
6061-T6 Aviation-grade extruded aluminum alloy
-
CNC machined for precise fit, function, and secure load management
-
Standard Trax are low profile and have rounded edges
-
Drill-through mounting holes (82 degree counter sunk) at 6” intervals
-
Strong powdercoat finish
-
Width 1.214”, height .359”
-
Lengths 3’ and 4’
-
Can be mounted vertically or horizontally
Load Lock Assembly
-
Injection-molded 30% glass-filled nylon retainer (finger grip)
-
Hardened, high-strength steel pin (RC33-39) with corrosion-resistant coating
-
Stainless steel compression spring
-
18/8 - 304 Stainless steel welded ring
-
Complete unit height: 2.12” top of ring (standing) to bottom of retainer
-
Width 1”, length 1.75”
-
Full 360-degree rotation of stainless steel ring
-
Convenient, singlehand attachment in seconds
-
Lock assemblies can be placed at 1” increments for unlimited tie-down possibilities
Mounting Hardware
-
1/4” x 1” Stainless steel machine screws
-
1/4” x 1” Sheet metal screws
-
Steel/zinc nylon lock nuts and washers |
Available in black or silver finish, these systems feature heavy-duty load locks that are removable and adjustable for ultimate versatility. Instantly create tie downs anywhere you need them!
Note: If used in conjunction with a tonneau cover some mounting options may not be possible. With most tonneau covers the trax system would have to be mounted on the bottom of the bed or on the inner, inside walls of the bed as opposed to the top side rail of the bed.
|
|
|
Purchasing Options
|
|
Black Kit
|
|
|
|
|
Silver Kit
|
|
|
|
|
|
|
|
Manufacturer part number(s):
CT36B, CT36S, CT48B, CT48S
|
|